VersaStop

The VersaStop is a rigid precision workstop you can rely on
for quick and predictable results.

  • Stop rods with diameters of .062” - .394” can be utilized
    in the VersaStop system. Stop rods can be nearly any
    shape; square, round, oblong, triangle, rectangle, or a
    hexagon.
  • When a 1/4” or larger stop rod is used, clearance issues
    are eliminated because the stop rod becomes the highest
    point of the system.
  • The stop rods can be conveniently loaded directly from
    the top which eliminates the need to slide it to the end
    for removal or insertion.

    VersaStop Work Stop

    See all of the VersaStop products, Click Below




    VersaStop

    Included Hardware:

    1pc RVSCRB1/4-20 x 1.25 SHCS Clamping Rod Bolt1pc RVSBB1/2-13 x 1 SHCS Mounting Bracket Bolt
    1 pc RVSPAB1/4-20 x 1.75 SHCS Pivot Arm Bolt1 pc RVSPCW1/4" Washer for Pivot Clamp

    To Order Entire Kits:

    RVSKL100 - Vide Stop Kit - LEFT HAND MOUNTRVSKR100 - Vise Stop Kit - RIGHT HAND MOUNT
    for standard 6" vise, includes all items above except RVSRB, which can be ordered separatelyfor Standard 6" vise includes all items above except RVSLB, which can be ordered separately


    VersaStop - Set up and Use:


    Your RedLine Tools VersaStop is shipped ready to attach tp your vise.

    For correct installation, rest the mounting bracket square on vise ways and fasten it with the supplied 1/2-13 socket head cap screw. Insert the desired stop rod into the stop rod clamp, position to desired length and tighten the clamp to 30 in/lbs. Warning never tighten over 40 in/lbs.

    Position the stop by loosening the pivot clamp screw. Once in position, tighten pivot clamp screw. Do not exceed 100 in/lbs.

    Your VersaStop is supplied with 1/4" diameter stop rods. Your VersaStop will accept stop rods from 1/16" to 3/8" in diameter. Clearance issues may arise when using stop rods smaller than 1/4" diameter. A shorter or longer bolt may need to be used when using other stop rods.