CNC Chip-Clearing Fan
The RedLine Turbo Chip Fans
RTF10 Chip Fan
The RTF10 RedLine Turbo chip-clearing fan is a safe and fast way to remove chips and coolant after a milling machine operation. The cylindrical shank can be mounted in a collet chuck or endmill holder.
- 3/4" Steel Shank
- Fiberglass reinforced nylon blades
- Simple replacement of fan blades
- Affordable
- Reduced cycle time and improved productivity
- Clears production area of chips and coolant in seconds
- 8,000 rpm operating speed
- For Vertical and Horizontal milling centers
RTF63 Chip Fan
The RTF63 RedLine Turbo chip-clearing fan is designed for smaller tool changers where space is a premium. These smaller fans rotate at a faster rate to efficiently remove chips and coolant.
- 3/4" Steel Shank
- Fiberglass reinforced nylon blades
- Simple replacement of fan blades
- Affordable
- Reduced cycle time and improved productivity
- Clears production area of chips and coolant in seconds
- 12,000 rpm operating speed
- For Vertical and Horizontal milling centers
RTF10 Chip Fan
The RTF10 Turbo Chip Fan in action.
RTF10 Chip Fan Repair
A step-by-step guide to repairing your RTF10 chip fan showing how to properly replace and align the blades, pins and springs.
Steel shank for durability.
Fiberglass reinforced nylon blades for easy replacement. Manufacturer compatibility: RedLine Tools, Kennametal, Midaco, Command, and Haas.
Proudly made in the USA!
RTF63 Chip Fan Repair
A look at the RTF63 chip fan for smaller CNC milling stations.
| Part # | Operating Speed | Blade Length | Ø Open Blade | Ø Closed Blade |
| RTF63 CNC Chip Fan63 | 8,000-12,000 RPM | 2.5" | 6.3" | 2.66" |
| Replacement Kits | Description |
| RTF63RK1 | 2.5" Single Blade Repair Kit |
| RTF63RK4 | 2.5" Four Blade Repair Kit |
